Installation - Beko DCU 7230 Manual

2

Installation

Refer to the nearest Authorised Service Agent
for installation of your product.
C
installation for the product is under
customer's responsibility.
B
be carried out by a qualified personnel.
A
have it installed. Damaged products will
cause risks for your safety.
Appropriate installation location
and level position.
under the product with materials such as
long pile rugs and wooden bands.
rug or on similar surfaces.
with a lock, sliding door or a hinged door
which can strike the product.
at the same place where its connections
have been made. When installing the
product, make sure that the rear wall of it
and also pay attention to install the product
at a place where it will stay permanently.
B
Do not place the product on top of the
power cable.
other furniture.
Removing the transportation
safety assembly
A
Remove the transportation safety assembly
before using the product for the first time.
2. There is a nylon bag inside the drum that
its section marked with XX.
the transportation safety assembly.
A
the transportation safety assembly
product for the first time. Do not leave any
items inside the drum.
Under counter installation
replacing the top trim must be provided and
installed by the Authorised Service Agent in
order to use the machine under a counter or
without the top trim.
the side and rear walls of the product and
the walls of the counter/cupboard when
installing your product under a counter or in
a cupboard.
Mounting over a washing machine
the two machines when installing above a
must be installed by the Authorised Service
Agent.
placed on top of a washing machine, the
reach 180 kg when they are full. Therefore,
the floor must be capable of carrying the
load on it!
Connection to water drain;
the water accumulated during the drying cycle
the accumulated water after each washing
cycle.
out through the water drain hose supplied with
the machine instead of periodically draining the
water collected in the water tank.
24 EN