Download Print this page
Lobaro LOB-GW-HYB-WMBUS Quick Start Manual

Lobaro LOB-GW-HYB-WMBUS Quick Start Manual

Wireless m-bus gateway v3

Advertisement

Quick Links

Manufacturer
Lobaro GmbH | Stadtdeich 7 | D-20097 Hamburg | Germany
support@lobaro.de | www.lobaro.de
Important notes
This document is a quick reference guide.
plementary
https://doc.lobaro.com.
The device is powered by an internal, replaceable 3.6V lithium
battery (Li-SOCl2), which is subject to transport restrictions.
Hazardous material class: 9A. The applicable transport regula-
tions must be met when transporting the device incl. inserted
battery. The battery must not be connected during transport!
The test certificates for the approved batteries are available on
request.
This product must be installed professionally and in accordance
with the specified installation guidelines and may therefore only
be installed by trained and qualified personnel. For installa-
tion in structures with increased fire protection requirements,
e.g. staircases, escape routes, the installation company or the
qualified personnel must ensure that the specific requirements
according to local building regulations are fulfilled!
These instructions must be read carefully before initial opera-
tion, followed and kept for the entire service life of the device.
Intended use
The Lobaro Wireless M-Bus Gateway V3 receives data telegrams from up
to 500 utility meters with standardized 868 MHz wireless M-Bus interface
and forwards them downstream via NB-IoT cellular radio or alternatively
LoRaWAN to the Internet for further processing or evaluation.
In addition to the unidirectional wireless M-Bus modes C1, T1 and S1,
the proprietary Sensus RF radio protocol is also supported by the radio
receiver in the gateway.
The previously received meter data is transferred to the Lobaro IoT plat-
form, optionally encrypted via DTLS, and can be viewed there or down-
loaded as a CSV file. Alternatively, the connection of other downstream
third-party systems via standardized APIs from the Lobaro platform is
easily possible.
LOB-GW-HYB-WMBUS
Wireless M-Bus Gateway V3
Quick Start Guide (EN)
product
description
is
available
A sup-
online
at

Advertisement

loading

Summary of Contents for Lobaro LOB-GW-HYB-WMBUS

  • Page 1 Sensus RF radio protocol is also supported by the radio receiver in the gateway. The previously received meter data is transferred to the Lobaro IoT plat- form, optionally encrypted via DTLS, and can be viewed there or down- loaded as a CSV file.
  • Page 2: Mode Of Operation

    The device is intended exclusively for the aforementioned pur- pose. An application other than previously described or a mod- ification of the gateway are considered as non-intended use and must be requested in writing in advance as well as specifically approved.
  • Page 3: Initial Operation

    The locking mechanism works analogously to the SIM card. Only 3.6V batteries approved by Lobaro may be used with the gateway. The use of other batteries, especially without velcro fluff, is not permitted, as there would be no sufficient protection of the battery in the housing.
  • Page 4 The pressure compensation element (9) and the IP66 housing protection class allow the gateway to be operated outdoors. Simplified CE declaration Lobaro GmbH hereby declares that the LOB-GW-HYB- WMBUS is in compliance with Directives 2014/53/EU and 2011/65/EU. The full text of the EU Declaration of Confor- mity is available at the following Internet address: https://doc.lobaro.com...
  • Page 5: Technical Specifications

    Technical specifications General Type LOB-GW-HYB-WMBUS Purchase name Wireless M-Bus Gateway V3 Input Voltage 3.3V to 5V, 3.6V (standard) Item number 8000162 Metering Wireless M-Bus S1, C1/T1 Mode RX frequencies 868.3 MHz, 868.95 MHz Standard DIN EN 13757-4 Proprietary mode Xylem SensusRF (BubbleUP) Typ.
  • Page 6: Warranty And Guarantee

    In Germany and for products delivered directly from Germany: Due to the applicable regulations, the electrical and electronic devices of Lobaro GmbH may not be disposed of via the public collection points for electrical devices! In order to create possibilities for the return of old devices, we cooperate with several qualified recycling companies.