Remote Control; Battery Installation; Functions Of The Remote Control Buttons - JVC KW-M875BW Instruction Manual

Monitor with receiver
Hide thumbs Also See for KW-M875BW:
Table of Contents

Advertisement

Remote control

Remote control
This unit can be operated using the remote
control.
The remote control is the optional accessory
(RM-RK258).
# WARNING
• Do not ingest the battery, Chemical Burn
Hazard
The remote control supplied with this product
contains a coin/button cell battery. If the coin/
button cell battery is swallowed, it can cause
severe internal burns in just 2 hours and can
lead to death.
Keep new and used batteries away from
children. If the battery compartment does not
close securely, stop using the product and
keep it away from children.
If you think batteries might have been
swallowed or placed inside any part of the
body, seek immediate medical attention.
# CAUTION
• Risk of fire or explosion if the battery is
replaced by an incorrect type. Ensure to
replace only with the same type.
• Risk of fire, explosion or the leakage of
flammable liquid or gas if the battery is left in
an extremely high temperature surrounding
environment and/or subjected extremely
low air pressure. The battery pack or batteries
shall not be exposed to excessive heat such as
sunshine, fire or the like.
• Risk of fire, explosion or the leakage of
flammable liquid or gas if the battery is
disposed into fire or a hot oven, recharged,
shorted, mechanically crushed or cut of the
battery.
• If spilled fluid comes in contact with your eyes
or on clothing, immediately rinse with water
and consult a physician.
80

Battery Installation

• Use a commercially available button battery
(CR2025).
• Insert the battery with the + and – poles
aligned properly.
– If the effectiveness of the remote controller
decreases, replace the battery.
Functions of the Remote
control Buttons
Key
Name
SRC
Switches to the source to be played.
In Hands-Free mode, hangs up the
phone.
VOL + –
Adjusts the volume.
ATT
Lowers the volume when pressed
once.
Restores the previous volume when
pressed twice.
DISP
Switches the screen between the
current source and the App screen
from the connected iPhone/Android.
CR2025 (+side)
Function

Advertisement

Table of Contents
loading

Table of Contents