Table of Contents
Advertisement
Tuner
Traffic Information (FM only)
You can listen to and watch traffic information
automatically when a traffic bulletin starts.
However, this feature requires a Radio
Broadcast Data System that includes TI
information.
1
Touch [
] on the left side of the screen.
Touch [TI].
h Traffic information mode is set.
h
Ñ
When the traffic bulletin starts
The Traffic Information screen appears
automatically.
NOTE
• It is necessary to turn on the Traffic Information
function in order to allow the Traffic Information
screen to appear automatically.
• The volume setting made during reception of
traffic information is automatically memorized.
When the traffic information is received next time,
this unit recalls the volume setting automatically.
• To cancel Traffic Information: Touch [Cancel].
34
Tuner SETUP (FM only)
You can set tuner related parameters.
1
Touch [
] on the left side of the screen.
Touch [SETUP].
h Tuner SETUP screen appears.
h
2
Set each function as follows.
[Area Setting]
■
The tuner channel interval changes
depending on the area where you use this
unit.
[North America] (Default): Select this when
using this unit in North/Central/South
America. FM and AM intervals are set to
200 kHz and 10 kHz respectively.
[South America]: Select this when using this
unit in South American countries where
the FM interval is 50 kHz. The AM interval
is set to 10 kHz.
[Europe]: Select this when using this unit in
any other areas. FM and AM intervals are
set to 50 kHz and 9 kHz respectively.
Advertisement
Table of Contents
