Advertisement
REPORT NO : HCT-F02-0406
Transmitter
1. Connect No.2 of Transmitter to the audio outlet (Earphone, Headphone, AUX) of
Computer, Audio apparatus)
2. Certify Transmitter Power On with No.4 Lamp
3. Plug the Antenna in No.3
∪ You can enjoy the perfect quality sound using the radio with FM 88.3 MHz without receiver∪
Receiver
1. Plug Earphone or Speaker in No.5 of Receiver, then Power on with No.6 switch
2. Adjust the Volume with No.7
How to recharge
1. Connect the Adapter to No.8 of the Recharge Cable (Adapter: 6~9V 300mA, center+)
2. Plug No.9 in No.1 of Transmitter
3. Plug No.10 in No.5 of Receiver
Connecting to Antenna
The antenna of 'SOUNDBIRD' adopts 'Jack Type' (putting it into the s Ant jack). You can put it in and pull
it
out
as
shown
* Since the antenna in the box set is specially manufactured, no other products can be substituted. Other
products may exceed FCC rules and cause the malfunction.
The Annotation:
1. You must charge your module battery because the purchase module does not have full battery power.
2. When you want to power off, turn off No.6 switch of Receiver first.
3. You'd better to adjust the V olume of the main audio instruments because each instruments has the different
volume position(computer 40~50%, MP3Player 70~80%).
4. You must plug out the cable being connected No.2 of Transmitter after using because the power of Transmitter
power is automatically working whenever you plug in.
5. The attention point in recharging:
a.
Need time to full recharge (from blank to full): 10 hr.
b. Confirm Power off position of Transmitter and Receiver
HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD.
SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA
FCC ID :QBFNSB001
in
the
picture.
TEL : +82 31 639 8518 FAX : +82 31 639 8525
DATE : APRIL 12, 2002
Antenna
is
separated
Audio Instruments (MP3,
on
your
purchasing.
Advertisement
