Usb/Ipod - Kenwood KMM-BT508DAB Instruction Manual

USB/iPod

Connect a USB device
USB input terminal
USB type A cable*1
(general products)
The source changes to USB automatically and playback starts.
Connect an iPod/iPhone
USB input terminal
KCA-iP103*2 (optional accessory)
or accessory of the iPod/iPhone*1
See "Set the playable source for iPod/iPhone" on page 12 to start playback.
• You can also connect iPod/iPhone via Bluetooth. (Page 16)
*1 Do not leave the cable inside the car when not in use.
*2 KCA-iP103: Lightning type
Basic operations
USB device
Selectable sources: USB/iPod USB or iPod BT
For playable audio file, see "Playable files" on page 36.
To
iPod/
iPhone
Play back/pause
Reverse/Fast-forward
Select a file
Select a folder*
Repeat play
Random play
* This does not work for iPod.
On the faceplate
Press 6 IW.
Press and hold S / T.
Press S / T.
Press 2 / 1 .
Press 4 repeatedly.
[FILE REPEAT]/[FOLDER REPEAT]/[ALL REPEAT]: MP3/
WMA/AAC/WAV/FLAC file
[REPEAT ONE]/[REPEAT ALL]/[REPEAT OFF]: iPod
Press 3 repeatedly.
[FOLDER RANDOM]/[RANDOM OFF]: MP3/WMA/
AAC/WAV/FLAC file
[SHUFFLE ON]/[SHUFFLE OFF]: iPod
Press and hold 3 to select [ALL RANDOM].*
ENGLISH
11