Maintenance And Cleaning; Troubleshooting - Naggura SWOP S301 Instruction Manual

Treatment table for medical examination

Table of Contents

Instruction

Manual

9. Maintenance and cleaning

Upholstery Daily Cleaning

It is very important for the life of the upholstery to clean it properly.

1.- Clean the entire surface using a mixture of 1:9 liquid soap (neutral pH) and water. Do not use soap or cleaning solutions

that contain alcohol, ketones, xylene, acetates or solvents (mineral/white spirits).

2.- Completely remove excess cleaner with a white, clean, damp cloth.

3.- Dry the surface.

For tougher stains refer to Spradling cleaning guidelines for PERMABLOK3 & PERMAGUARD vinyl upholsteries.

- Important: Lacquers, strong cleaners, xylene-based solutions, acetone or MEK cause immediate damage and contribute to

the deterioration of the material. The use of such cleaners is at the owner's risk.

Table Frame Cleaning

Remove dust with a white cloth.

Use alcohol-free cleaning wipes to clean the structure or simply use a white cotton cloth soaked in a mix of water with neutral

diluted soap and rinse. Dry with a clean cloth.

Maintenance

Naggura tables have been designed for an intensive use during long time thanks to their stability, reliability and durability.

However, we advise to keep the table in perfect conditions and make a correct use of it. Unplug the table if you will not use it

for a long period of time.

Environment information

This symbol indicates that some electrical components or materials can be reused and/or are harmful to the environment

and thus, they must be properly recycled. Ensure that you are familiar with the local rules and regulations regarding to the

disposal of equipment and accessories.

Squeaking noise when moving the table up & down (mechanical noise)

• The axes are adjusted and greased from factory but with the time and use, they may need some little adjustement. Remove

the grey plugs of the 2 connecting rods (4 at each side, so 8 in total). Loosen the axes a litlle bit by unscrewing them (approx. 2

turns). Apply a bit of neutral grease and plug them again.

Table of Contents