Advertisement
(1) The status bar on top of the page shows the product model, time, Bluetooth status.
①
Model numbers varies depending on the product models.
②
Bluetooth not connect;
③
During operation,
and
appear when temperature below the lower alarm limit.
Record: close means no data is recorded. Record Open: means that data is
④
being recorded.
(2) The middle part of the page is the sub-interface button.
: Real-time measurement interface
①
Measure
②
: Graph
Graph
③
: Vacuum parameter setting
Settings
④
: System parameter display and setting
System
(3) The motor is o by default after power-on. Click "
to stop the motor.
When the motor starts, the solenoid valve automatically opens instantly. The solenoid
valve closes automatically after the motor stops to avoid the oil be suck to vacuum sensor.
1. Real time measurement interface
Click the"Measure" button on the main interface to enter the real-time measurement
interface.
Bluetooth connected.
appear when temperature exceeds the upper alarm limit,
-5-
" to start the motor. Click "
"
Advertisement
