Advertisement
Screw in four threaded rods into metal plates on the inner side of armrest by hand
until about half of the thread is exposed. Repeat steps for other armrest.
Locate pre-drilled holes on the side of sofa body and match the orientation with
the correct armrest.
Now, carefully join armrest (with the four threaded rods exposed) with sofa body by
aligning and going through the four pre-drilled holes at the side of sofa body.
Secure all four threaded bolts with washers and nuts (A) from inside with small spanner,
making sure there is no movement.
5 of 8
Advertisement
