Table of Contents
Advertisement
USING THE menu SYSTEM
Channel Menu
Signal Type Displays a choice list that lets you select the current
antenna type. This option does not appear when the GUIDE Plus+
system is set up.
UHF/VHF Antenna Choose this if you are currently using an off-air
antenna for TV signals.
Cable TV Choose this if you are currently using cable or a cable
box for TV signals.
Auto Channel Search Tells the TV to search automatically for all the
channels available through the antenna input. When the TV finds an
active channel, it places it in the Normal channel list; inactive channels
(weak stations or channels with no signal at all) will be removed from
the channel list. If you are using a cable box and have set up the GUIDE
Plus+ system then this option does not appear.
List and Labels Displays a control panel that lets you edit your
Normal channel list and choose a six-character label for each channel.
Follow the on-screen directions to enter your channels and other
information.
Chan # Use the up and down arrows to scroll up and down
through the channels available via your antenna. You can enter the
channel number directly using the number buttons.
Normal List Only the channels included in the Normal list are
available when you scan up and down using the CH^/v buttons. Use
the up and down arrows to indicate whether the channel number
indicated is included (Yes) or is not included (No) in the Normal
channel list.
Chan Label Use the up and down arrows to enter a six-character
label for each channel. Hold the button down to scroll quickly
through the characters. Press RESET to clear a label. The TV can
store up to 27 labels in memory.
Auto Tuning Displays a choice list that lets you set up the TV to
automatically tune to the correct input channel when you press a
component button (VCR1, DVD, VCR2 or SAT•CABLE) on the remote.
Set VCR 1 Channel Displays a choice list that lets you select the
channel that the TV tunes to when you press the VCR1 button.
Set VCR 2 Channel Displays a choice list that lets you select the
channel that the TV tunes to when you press the VCR2 button.
Set DVD Channel Displays a choice list that lets you select the
channel that the TV tunes to when you press the DVD button.
Set SAT/CABLE Channel Displays a choice list that lets you select
the channel that the TV tunes to when you press the SAT•CABLE
button.
TV MAIN MENU
1 Audio
2 Picture Quality
3 Screen
4 Channel
5 Time
6 Parental Controls
7 GUIDE Plus+ Menu
CHANNEL
8 Setup
0 Exit
1 Signal Type
2 Auto Channel Search
3 List and Labels
4 Auto Tuning
0 Exit
35
Advertisement
Table of Contents
