Using The Remote To Select An Audio Processor - RCA Pius+ Gold System User Manual

USING THE menu SYSTEM
Second Audio Program (SAP) Plays the program's audio in a
second language, if one is available. The TV displays the word SAP
when you tune to a program that is broadcast with SAP
information. SAP audio is broadcast in mono. SAP is also used to
broadcast a program's audio with descriptions of the video for the
visually impaired.
Audio Output & Speakers Displays a choice list that lets you turn the
TV's internal speakers on or off and set the audio outputs to fixed-level
or variable control level.
Variable Output, Speakers On This setting turns the TV's speakers
on and allows variable output from the TV's audio output jacks.
Variable Output, Speakers Off This setting turns the TV's
speakers off and allows variable output from the TV's audio output
jacks.
Fixed Output, Speakers Off This setting turns the TV's speakers
off and allows fixed output from the TV's audio output jacks to an
external device such as a surround sound amplifier. With Fixed
Output On, the TV's volume control, tone controls and mute are
disabled.
Using the Remote to Select an
Audio Processor
You can change the audio processor from the Audio menu, as illustrated
above, or by pressing the SOUND button on the remote. To make a
selection using the remote:
1. Press SOUND to display the audio processor choice list.
2. Point to and select a different audio processor or press CLEAR to
exit.
ON OFF
TV
SAT CABLE
DVD AUX
MUTE SKIP
SOUND GO BACK
REVERSE PLAY FORWARD
STOP PAUSE
PIP SWAP CH CTRL RESET
31