Table of Contents
Advertisement
Interactive Setup
Select Yes if the cable box changed to channel 9, or No if it did not. If you select No, the system will try
another code.
If the GUIDE Plus+ Gold system cannot recognize either your cable box or VCR after several tries, a screen
stating "Cable Box (VCR) test failed...Please consult your manual and try again" appears. You have a
choice to either Try Again or Skip Cable Box Setup. If you get this message, you should also:
•
Double check the brand of your cable box or VCR, and try entering it again.
•
Check to make sure the IR controllers are positioned correctly.
If you choose to skip the cable box (or VCR) setup some features of the guide may not be available until
you successfully complete this procedure.
Once the correct model of cable box (or
VCR) has been identified, you need to set
the cable box's output channel. Enter the
channel you use to view channels through
your cable box—usually 3 or 4. Consult
your cable box's instruction book or your
cable company if you are not sure. Choose
0 to use VIDEO INPUT.
Select YES if you have a VCR, or NO if not.
(Answering NO automatically skips forward
to the end of GUIDE Plus+ Gold setup.)
Tune your VCR to channel 2 and turn it off.
Enter the brand of your VCR.
When the GUIDE Plus+ Gold system correctly
identifies the correct code for your VCR,
the VCR's tuner changes to channel 9.
Select YES if the VCR automatically changed
to channel 9, or NO if it did not.
If you select NO, the system will try another
code.
The last screen comes up when you've
successfully finished the GUIDE Plus+ Gold
setup.
Remember:
•
Leave your cable box turned ON to download program information.
•
Leave your VCR turned OFF to record programs and download program
information.
Press OK to leave the GUIDE Plus+ Gold system setup.
15
Advertisement
Table of Contents
