Related Manuals for Kellfri 21-KG08
Summary of Contents for Kellfri 21-KG08
- Page 1 21-KG08 21-KG18 21-KG21 GRAPPLE The figure shows 21-KG21. Read the operating instructions carefully before using the product! Operating instructions translated from Swedish...
-
Page 2: Table Of Contents
Deviation form Warranty terms and conditions Kellfri designs and supplies efficient, affordable machinery and components for forestry, agriculture, construction and gardening in Sweden, the rest of the Nordic region and Europe. We recommend that you always read and follow the safety instructions and the instructions in the machine’s operating manual. -
Page 3: Introduction
INTRODUCTION Thank you for choosing a product from Kellfri AB. Complying with the safety information, in- struction manual and using common sense will guarantee many years of enjoyment with the product. Kellfri’s equipment and products are aimed at self-employed farmers, horse enthusi- asts and other country-dwellers who have stringent demands on performance. -
Page 4: Safety Instructions
For the safety of both yourself and others, it may be a good idea to read through the safety instructions every now and then. If the safety instructions or the operating manual are dam- aged, or become unusable for any other reason, new copies may be ordered from: Kellfri AB, Munkatorpsgatan 6, SE-532 40 SKARA, Sweden. -
Page 5: Surroundings
SURROUNDINGS Check that the work area is free from bystanders and objects before hitching or using the equipment. Otherwise, there is a risk of serious injury. Be extra careful if there are children in the vicinity of the area where the equipment or product is used or stored. Check that there are no low-hanging electrical cables within the work area. -
Page 6: Use
Only those who understand the safety instructions and the operating manual may use the equipment or product. Exercise caution and care when working with the equipment or prod- uct, and only use it as described in the instruction manual. There is a risk of crushing when working with equipment that has moving parts. Exercise cau- tion when working with equipment with hydraulic hoses, as oil under pressure can penetrate the skin. -
Page 7: Maintenance And Service
Contact your local au- thority for further information. Kellfri AB has a policy of continuous product development and therefore reserves the right to make modifications, e.g. to the design and appearance of the product, without prior notice. -
Page 8: Forestry Trailers/Grapple Loaders
The maximum speed for a full load is 30 km/h. • Kellfri is not liable for any modifications, changes or rebuilds carried out by customers. The controls are placed in optimal position with tractor/ATV. Warning! Hydraulic hoses must not be attached inside the cab. -
Page 9: Use And Care Instructions - Forestry Trailer With Crane
USE AND CARE INSTRUCTIONS – FORESTRY TRAILER WITH CRANE • Check that the crane is undamaged before connecting it to the vehicle. • Connect the equipment and lock it in place. Always check the locking pins before use. • There is usually air in the system at the start. Carefully extend all cylinders fully a few of times to purge any air from the system. -
Page 10: Warning Decals
WARNING DECALS Make sure warning decals are always visible and clean them when necessary. Do not use a high-pressure washer directly on the warning decal. If apart with a decal is replaced, or the decal becomes worn or in any other way unusable, order a new set of decals. SYMBOL EXPLANATION Read the operating instructions. -
Page 11: Lubrication Points
GREASE POINTS Grease nipples are located on the right and left. Both front and back. The figure shows 21-KG21. Table of contents... -
Page 12: Spare Parts
SPARE PARTS 21-KG08 21-KG18 21-KG21 Cylinder R21-KG08.001 R21-KG18.002 R21-KG21.001 Gasket kit for R21-KG18.004 R21-KG21.006 cylinder Table of contents... - Page 13 The figure shows 21-KG08. Table of contents...
-
Page 14: Claw Beam Attachment 21-Bkg21
CLAW BEAM ATTACHMENT 21-BKG21 With this grapple accessory, you can easily pick up bushes, saplings, etc. Fits grapple 21-KG21. Installation Start by fitting the part marked A. "Wide grip" Then fit the part marked B."Narrow claw". NOTES: Table of contents... -
Page 15: Deviation Form
DEVIATION FORM We are grateful for your help in pointing out any defects in the product supplied to you by Kellfri. Before making a claim, read Kellfri’s general purchase terms and conditions in our catalogue or on our website www.kellfri.co.uk, and in the operating manual if supplied. -
Page 16: Warranty Terms And Conditions
You are always welcome to give feedback or ask us about our equipment and products. Kellfri AB has a policy of continuous product development and therefore reserves the right to make modifications, e.g. to the design and appearance of the product, without prior notice.