Advertisement
DAB outdoor antenna (not included)
The illustration shows an example of installation.
The antenna plug adaptor (included) does not have to be used if the
plug on the antenna cable is suitable.
DAB outdoor antenna
(not included)
75 Ω coaxial cable
(not included)
or
300 Ω feeder wire
(not included)
How to use the DAB antenna plug adaptor
(included)
Two types of wire are most commonly used for connection from the
antenna: 300 Ω parallel feeder wire or 75 Ω coaxial cable. For best
resistance to outside interference, use 75 Ω coaxial cable.
To connect a 75 Ω coaxial cable
1 Remove a piece of the outer vinyl insulator.
2 Carefully pull the tabs apart to remove the cover.
3 Remove the lead wire and clamp it with the plastic bar.
4 Install the coaxial cable.
Clamp the cable conductor, and wind it on so that it doesn't
contact anything else.
5 Attach the cover.
1
20 mm
2
Lead wire
3
4
Press down with pliers.
DAB antenna plug
adaptor (included)
C
DAB ANT
75
i
10 mm
Plastic bar
To connect a 300 Ω feeder wire
Loosen the screws, connect the wires, and tighten the screws to
secure the connection.
300 Ω feeder wire
(not included)
Advertisement
