Camera Angle (Dvd); Play Mode - RCA RTD317 User Manual

The Info Menu

Camera angle (DVD)

Some discs offer different camera angles for
specific scenes.
1. To change the camera angle, press the
ANGLE button on the remote or press the
INFO button twice and select the Camera
angle icon with the left/right buttons.
2. Choose the angle with the up/down
arrow buttons.
If the disc was recorded using a single
camera angle, this function is not available.
Play mode (all discs except
mp3/WMA/jpeg)
1. While the disc is playing, press the INFO
button twice for CD and three times
for DVD.
2. Select the Play Mode icon using the left/
right arrow buttons.
3. Use the up/down arrow buttons to select
an option.
• DVD play modes: standard, program, A-B
repeat, title repeat, chapter repeat.
Program play mode is only available if a
program list has been created (see below).
Repeat mode is only available with discs
that display elapsed time and remaining
time. To repeat a sequence between
points A and B, choose the A-B repeat
option, and then follow the instructions
for entering the two points.
• Audio CD play modes: standard, introscan,
random, program, repeat A-B, repeat disc,
repeat track.
4. To stop repeat playback, select the Play
Mode icon and use the up/down arrow
buttons to choose the Standard option.
Note:
• For mp3 play modes, please refer to
page 15.
Creating a Program List for
Program Play Mode (Audio
CDs and DVD discs)
To use program play mode, you must first
create a program list.
1. To create a program list, press the INFO
button three times. Highlight the Play
Mode option and press the up arrow to
select the Program option.
2. Press OK. The Program screen is displayed.
3. The first spot in the list is highlighted. Use
the number buttons on the remote to
enter a track number. As for DVD discs: T
stands for Title while C stands for Chapter.
As for Audio CDs: T stands for Track.
4. Use the arrow buttons to move to the
next spot in the list. Enter the next
track number.
5. Continue entering tracks until you have
completed your list.
6. Highlight the Play option at the bottom of
the screen and press OK or press PLAY to
start playback. The program list will play
in the order you programmed it.
To stop program play, press STOP or select
Standard from the Play Mode option in the
INFO display.
If you want to cancel the list, repeat steps 1
and 2 to select CLEAR and press OK.
EN
13