Introduction - Fire-Lite Alarms APS-6RF Installation Instructions Manual

 ,QVWDOODWLRQ
4
Technical Manuals Online! - http://www.tech-man.com
W : Use extreme caution when working with the
ARNING
APS-6RF—high voltage and AC line-connected circuits are

present in the APS-6RF. Turn off and remove all power
sources. To reduce the risk of electric shock—make sure to
properly ground the APS-6RF.
Before field wiring, install the APS-6RF cover (Figure 4 on
page 7). When finished field wiring, install the press-fit
terminal block cover (Figure 4 on page 7) over TB1.
This section contains instructions for field-wiring the
APS-6RF to a control panel, field-wiring multiple APS-6RFs,
and mounting the APS-6RF. Table 3 contains the installation
topics covered in detail:
Topic
Mounting the APS-6RF to a
CAB-200 Backbox
Mounting the APS-6RF to a
CAB-A3F, CAB-B3F
Installing the Plastic Cover
Wiring the APS-6RF
Wiring Multiple APS-6RFs
Connecting the APS-6RF to an IC-
4F/ICE-4F Module
Configuring the APS-6RF
Servicing the APS-6RF
APS-6RF Installation Instructions PN 50893:A 4/15/98
firealarmresources.com
Refer to...
Figure 2 on page 5
Figure 3 on page 6
Figure 4 on page 7
Figure 5 on page 8
Figure 6 on page 9
Figure 7 on page 11
Figure 8 on page 12
Figure 9 on page 13
Table 3 Installation Topics

Introduction