Configuring The Aps-6Rf - Fire-Lite Alarms APS-6RF Installation Instructions Manual

 ,QVWDOODWLRQ
12
Technical Manuals Online! - http://www.tech-man.com
W : Use extreme caution when working with the
ARNING
APS-6RF—high voltage and AC line-connected circuits are

present in the APS-6RF. Turn off and remove all power
sources. To reduce the risk of electric shock—make sure to
properly ground the APS-6RF.
Before field wiring, install the APS-6RF cover (Figure 4 on
page 7). When finished field wiring, install the press-fit
terminal block cover (Figure 4 on page 7) over TB1.
Figure 8 shows how to configure the APS-6RF for the
following:
• 8-hour delay for reporting loss of AC: cut jumper JP2.
• 16-hour delay for reporting loss of AC: cut jumper JP2 and JP3.
• 120 VAC/240 VAC operation.
Figure 8 contains an exploded view of the APS-6RF, that
shows the location of jumpers JP2 and JP3.
)LJXUH  &RQILJXULQJ WKH $365)
APS-6RF Installation Instructions PN 50893:A 4/15/98
firealarmresources.com

Configuring the APS-6RF

-3
&XW IRU KRXU
$& GHOD\ DOVR FXW
-3 
-3
KRXU $&
GHOD\
-3
&XW IRU
 9$& RSHUDWLRQ