Page 2
36 014 36 247 Bitte diese Anleitung an den Benutzer der Armatur weitergeben! Please pass these instructions on to the end user of the fitting! S.v.p remettre cette instruction à l'utilisateur de la robinetterie!
If the running time cannot be set, the running time setting is deactivated. In order to activate the setting time, cartridge GROHE Deutschland Vertriebs GmbH maintenance must be performed, but without replacing the Zur Porta 9 battery, see description in the Maintenance section.
Automatic flushing 4. Pull off red end-stop (T) and refit with the arrow (T1) pointing to the maximum desired temperature. The automatic flushing serves to protect the water hygiene in 5. Push on scale handle (P) in such a way that the 20 °C mark cases of longer non utilization the mixer and activates water on the handle coincides with the mark (R) on the cover plate flow 3 days after the last use for 5 minutes.
Page 6
Shut off cold and hot water supplies. 4. Pull off stop ring (X). 5. Remove adjusting nut (S) with overload unit (S1). 6. With a 22mm open-ended spanner, unscrew and remove IV. Solenoid valve thermoelement (Y). 1. Loosen screw (U1), see Fig. [10]. Re-assemble in reverse order.
Need help?
Do you have a question about the Eurodisc SE 36 247 and is the answer not in the manual?
Questions and answers