Table of Contents
Advertisement
5. Method of Use
1). Control panel and functions
1
(1). Knob
·
It is used to turn the power on/off. In case of shut down during operation, rotate the knob to
"OFF".
·
The dry will automatically shut down after the program ends. If there is no operation within
2 minutes in the standby mode, the dryer will shut down automatically.
·
It is used for program selection. Please refer to [Program guide] for program introduction.
(2). Start Pause
·
Press the "Start Pause" key to pause or start the program.
·
When the program is suspended, the set functions cannot be changed. In case of
changing the settings, shut down the dryer and restart for re-selection.
(3 . More Time
)
·
Before the program starts, this function can add drying time of the program. Press
continuously to cycle through the set tap positions. Different programs have different tap
position settings.
(4 . Less Time
)
·
Before the program starts, this function can reduce drying time of the program. Press
continuously to cycle through the set tap positions. Different programs have different tap
position settings.
18
10
8
4 5
7
3
6
2
(5). Anti crease
·
If the clothes cannot be taken out in time after drying, select the anti crease program. At
this time, the inner drum rotates intermittently to prevent clothes from creasing.
·
Touch any key or open the door to exit the anti crease mode. If there is no operation, the
longest execution will end automatically after 12 h by default.
(6 . Dry level
)
·
For selection of drying effect. The default option is [
select.
【
】m
eans the clothes can be stored after drying
【
】means the clothes has a small amount of water and can be ironed.
【
】means the clothes can be worn immediately after drying.
( )
7 . Delay End
This function can delay the end time of the program.
·
Make an appointment after selecting programs and functions. Press the appointment button
to add or reduce the appointment time. The time changes by 1 hour for each press, and
the maximum optional time is 24 hours.
9
·
The appointment time is the end time of the program, including the running time of the
whole program, so the appointment time must be longer than the running time of the
program.
·
During the appointment process, the appointment icon is lit up. After the appointment
process ends, the appointment text goes out.
·
Before the program starts, the selected appointment can be canceled by selecting other
programs or function keys.
·
After the program is started, in case of canceling the appointment, shut down and restart
the dryer.
(8). Child Lock
In order to avoid children's misoperation and protect children's safety, this fryer is equipped
with child lock.
After the program is started, press and hold "More Time+Less Time" simultaneously, the
·
child lock will be enabled and the child lock icon will be lit up. The child lock can be
released by the same operation.
·
After the child lock function is set, other function keys are locked. In case of program ends
or restart after power-off, the child lock function set remains.
·
After the child lock function is enabled: Press the "Start Pause" key to cancel the prompt in
case of prompt for lint and debris cleaning. During running in anti crease mode, the child
lock needs to be released manually, and the anti crease function ends automatically.
], and press the dry level key to
.
19
Advertisement
Table of Contents
