Connecting Directly To A Pictbridge Compatible Printer - Casio EXILIM EX-Z800 User Manual

Connecting Directly to a PictBridge Compatible Printer

You can connect the camera directly to a printer that supports PictBridge and print
images without going through a computer.
. To set up the camera before connecting to a printer
1.
Turn on the camera. Next, press [SET] and then display the REC menu
(page 63) or the PLAY menu (page 90).
2.
On the "Set Up" tab, select "USB" and then press [6].
3.
Use [8] and [2] to select "PTP (PictBridge)", and then press [SET].
. Connecting the Camera to a Printer
Use the USB cable that
comes bundled with the
camera to connect the
camera to your printer's USB
port.
• The camera does not draw
power over the USB cable.
Make sure the camera's
battery is sufficiently
charged before
connecting.
• Make sure that you insert
the cable connector into
the USB/AV port until you
feel it click securely into
place. Failure to insert the
connector fully can result
in poor communication or
malfunction.
• Note that even while the
connector is fully inserted, you still will be able to see the
metal part of the connector as shown in the illustration.
• When connecting the USB cable to a USB port, make sure
you align the connector correctly with the port.
Large connector
USB port
Making sure that the
connector is towards the lens side, connect the cable to
the camera.
109
USB cable
USB/AV port
Small connector
mark on the USB cable
Printing