Advertisement
3.0 Installation
Please make sure that the wall or ceiling is strong enough to withstand 3 times the weight
of the camera. Please install the camera in and under a dry environment.
1.
Fixed Screw
2. Open the cover of the dome and then insert a micro SD card.
3. Drill the screw holes and the cable hole on the wall according to the drill template.
4. Route and connect the cables. Then secure the mounting base to the ceiling or wall
5. Install the cover back to the camera and fix it with the screws firmly. Please note that
9
Loosen the fixed screw to disassemble the camera.
Cover
with the screws provided.
the cover should not be installed unevenly.
Mounting Base
Enclosure
Dome
Insert a Micro SD Card
Advertisement
