End Time - Beko BFLB904ADG User Manual

d3: High
• The softener dosage level settings can be
changed by pressing down "Temperature"
selection key as shown below:
s1: Low
s2: Medium
s3: High
When dosage amount setting process is
completed, you can return to the main menu
by pressing the automatic dosage key. For
all programmes, dosing will be performed
based on the latest settings you have selec-
ted until you select a new setting.
• Child Lock
Use Child Lock function to prevent children
from tampering with the machine. Thus you
can avoid any changes in a running pro-
gramme.
You can switch on and off the ma-
chine with On / Off button when the
Child Lock is active. When you
switch on the machine again, pro-
gramme will resume from where it
has stopped.
When the Child Lock is enabled, an
audio warning will be given if the
buttons are pressed. Audio warning
will be cancelled if the buttons are
pressed five times consecutively.
To activate the child lock:
Press and hold the related auxiliary function
button for 3 seconds. After the countdown
as "3-2-1" on the display is over, Child Lock
symbol appears on the display. When this
warning is displayed, you can release the
Auxiliary Function button 3.
To deactivate the child lock:
Press and hold the related auxiliary function
button for 3 seconds. After the countdown
as "3-2-1" on the display is over, Child Lock
symbol disappears.
• Wireless Connection
You can match your machine and your
smart devices with the wireless connection.
This way, you can use your smart device to
get information about your machine and
control it.
To activate wireless connection:
Press and hold Remote Control button for 3
seconds. After countdown "3-2-1" on the
display ends, "On" symbol appears. When
this notification is displayed stop pressing
the remote control button. The wireless con-
nection icon blinks when the product is con-
necting the internet. If connection is suc-
cessful, icon will remain on.
To deactivate wireless connection:
Press and hold Remote Control button for 3
seconds. Countdown "3-2-1" will be dis-
played, and then "Off" symbol will appear on
the display.
To be able to enable wireless con-
nection, machine setup should be
completed through HomeWhiz ap-
plication. After setup, wireless con-
nection will be enabled automatically
if you press "Remote Control" but-
ton.

6.9 End Time

Time display
When the end time function is selected, the
remaining time until the programme starts is
shown in hours such as 1h, 2h, and the re-
maining time to complete the programme
after your programme starts is shown in
hours and minutes as in the 01:30 example.
EN / 30