Settings - AEG FFB41600ZW User Manual

5.1 Consumption values
Programme
1) The pressure and the temperature of the water, the variations of the mains supply, the options, the
quantity of dishes and the degree of soil can change the values.
2) The values for programmes other than
5.2 Information for test
institutes
To receive the necessary information for
conducting performance tests (e.g.
according to GB/T 20290-2016), send an
email to:
info.test@dishwasher-production.com

6. SETTINGS

6.1 Programme selection
mode and user mode
When the appliance is in programme
selection mode it is possible to set a
programme and to enter the user mode.
Settings available in the user mode:
• The level of water softener according
to the water hardness.
• Activation or deactivation of the rinse
aid empty notification.
• Activation or deactivation of AirDry
（空气对流干燥）.
As the appliance stores the saved
settings, there is no need to configure
it before every cycle.
How to set the programme
selection mode
The appliance is in programme selection
mode when the programme indicator
is on and the display shows the
programme duration.
Water
1) 2)
(l)
12.1
10.5
14 - 15
10
Energy
(kWh)
0.923
1.236
1.5 - 1.7
0.8
are indicative only.
In your request, include the product
number code (PNC) from the rating plate.
For any other questions regarding your
dishwasher, refer to the service book
provided with your appliance.
After activation, the appliance is in
programme selection mode by default. If
not, set the programme selection mode
the following way:
Press and hold simultaneously 延时启动
and 选项 until the appliance is in
programme selection mode.
How to enter user mode
Make sure the appliance is in
programme selection mode.
To enter user mode, press and hold
simultaneously 延时启动 and 选项 until
the indicators
flash and the display is blank.
6.2 The water softener
The water softener removes minerals
from the water supply, which would have
a negative effect on the washing results
and on the appliance.
ENGLISH 9
Duration
(min)
227
156
155 - 170
30
, and