Options; Before First Use - AEG FFB41600ZW User Manual

12 www.aeg.com

7. OPTIONS

Desired options must be
activated every time before
you start a programme.
It is not possible to activate
or deactivate options while a
programme is running.
The 选项 button toggles
between the available
options and their possible
combinations.
Not all options are
compatible with each other.
If you select non compatible
options, the appliance
automatically deactivates
one or more of them. Only
the indicators of the still
active options are on.
If an option is not applicable
to a programme, the related
indicator is off or it flashes
quickly for a few seconds
and then goes out.
Activating options can affect
the water and energy
consumption as well as the
programme duration.
7.1 加强烘干
Activate this option to boost the drying
performance. With 加强烘干 on, the

8. BEFORE FIRST USE

1. Make sure that the current level of
the water softener agrees with the
hardness of the water supply. If
not, adjust the level of the water
softener.
2. Fill the salt container.
3. Fill the rinse aid dispenser.
4. Open the water tap.
5. Start a programme to remove any
processing residuals that can still be
inside the appliance. Do not use
detergent and do not put dishes in
the baskets.
duration of some programmes, water
consumption and the last rinse
temperature can be affected.
加强烘干 is a permanent option for all
programmes other than
not to be selected at every cycle.
In the other programmes the setting of 加
强烘干 is permanent and it is
automatically used in next cycles. This
configuration can be changed at any
time.
Every time
activated, 加强烘干 is off
and needs to be chosen
manually.
How to activate 加强烘干
Press 选项 until the indicator
The display shows the updated
programme duration.
7.2 加强除菌
This option provides better hygiene
results by keeping the temperature at
70 °C for at least 10 minutes during the
last rinsing phase.
How to activate 加强除菌
Press 选项 until the indicator
The display shows the updated
programme duration.
After starting the programme, the
appliance recharges the resin in the
water softener for up to 5 minutes. The
washing phase starts only after this
procedure is complete. The procedure is
repeated periodically.
and need
is
is on.
is on.