AEG OKO-LAVAMAT 88830 User Information page 34

Operating Instructions
Problem
The washing machine
vibrates during opera-
tion or it is on an une-
ven surface.
The washing solution
of the main wash
froths up a lot.
Water is flowing out
from beneath the
washing machine.
34
Possible Cause
The transport packaging has
not been removed.
The height-adjustable screw
feet are not correctly set.
There is not much washing in
the drum (e.g. only one
dressing gown).
The water could not be com-
pletely pumped off before
spinning because
The drainage hose is bent or
The solution pump is
blocked.
Too much detergent was
probably used
The screw connection on the
intake hose is leaky.
The drainage hose is leaky.
The washing solution pump
cover is not correctly closed.
Washing in caught in the fill-
ing door.
The emergency emptying
hose is not correctly closed
or leaks.
Remedy
Remove transport packaging
according to the installation
and connection instructions.
Adjust the feet according to
the installation and connec-
tion instructions.
This does not impair the
function.
Check the laying of the
drainage hose and eliminate
the bend if necessary, or
clean the solution pump and,
if required, remove foreign
bodies from the pump hous-
ing.
Meter the detergent exactly
in accordance with the man-
ufacturer's information.
Tighten the intake hose
screw connection.
Check the drainage hose and
replace it if necessary.
Close cover correctly.
Abort the program and re-
move the washing through
the door. Restart the pro-
gram.
Close the emergency empty-
ing hose correctly (see the
section "Carry out emer-
gency emptying"). Inform
Customer Service if the
emergency emptying hose
leaks.