Germid BV-096B-2K User Manual

Germid BV-096B-2K User Manual

9.66 inch 2k hd steaming media mirror monitor with built-in dash camera

Advertisement

Quick Links

FCC STATEMENT
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to
operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
9.66 Inch 2K HD Steaming Media Mirror Monitor
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the
With Built-in Dash Camera
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
U S E R M A N U A L
following measures:
-- Reorient or relocate the receiving antenna.
BV-096B-2K
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be
installed and operated with minimum distance 20cm between the radiator & your body.
Serial No.: 2020BV0962K0521

Advertisement

Table of Contents
loading

Summary of Contents for Germid BV-096B-2K

  • Page 1 U S E R M A N U A L following measures: -- Reorient or relocate the receiving antenna. BV-096B-2K -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Page 2: Packing List

    Statement PACKING LIST 1. It is strictly forbidden for the driver to operate this product while driving! All the consequences caused by the driver's illegal operation Package contains following items, please confirm. while driving are irrelevant to the company! 1. Steaming media dash cam 2.
  • Page 3: Product Features

    PRODUCT FEATURES PRODUCT INTRODUCTION 9.66 inch full dispaly screen Wi-Fi connect parking monitor EQUIPMENT INSTRUCTIONS 1080P rear recording HD night version Car on auto record 2K front recording Backup camera display Waterproof rear camera PRODUCT SPECIFICATION Front lens resolution: 2560*1440 or 1920*1080 Front camera: IMX335, 5 million Pixel Storage: 8~64GB, CLASS10 U1, SD card Rear lens resolution: 1920*1080...
  • Page 4: Recording Interface

    RECORDING INTERFACE 1: The red light flashing indicates the device is recording. When the recording is stopped, the red light disappears. 14: Drag up and down on the 1/3 of left screen to adjust the display area 2: Recording resolution display of front lens 8: Battery status display 15: Swipe from left to right to enter the video playback interface 3: Recording time...
  • Page 5: Camera Interface

    CAMERA INTERFACE HOW TO WIRE To connect with car cigar lighter Rear camera Switch to the recording interface Take pictures Enter the setting interface Connect with reversing lights VIDEO PLAYBACK INTERFACE (If do not connect with this line, the mirror screen will not switch to the File selection rear view when reversing) Back...
  • Page 6: Menu Setting

    Record Audio: On / off can be set; when set to "Off", there will be no sound in recording video. MENU SETTING G-Sensor: Off / High / Medium / Low can be set; when gravity sensor is turned on, the machine is subjected to collision during In the main interface, short press the button to enter the system menu setting interface.
  • Page 7 WI-FI CONNECTION Built-in Wi-Fi module, this machine can be connected to 3. Click the icon to connect the phone and dash cam. mobile phone through Android or IOS APP, please follow the Resolution 1080P+1080P instructions below. 1. Search "RoadCam" in the App store (Apple) or App Store (Android), or scan the QR code below to quickly install the APP.
  • Page 8 4. After connecting successfully, on the bottom right corner of the dash cam will display "Please operate in the App!" Users can 5. Click to enter the recorded video interface, you can perform individual, batch deletion, or download to the local on the view the video being recorded or make other settings on the mobile phone.

Table of Contents