Table of Contents
Advertisement
RECESSED WALL INSTALLATION CONTINUED
Remove the two (2) silver color screws in both sides of the fireplace. Figure C
3
4
Remove one (1) screw near the hot air exhaust port on both sides of unit. Figure D.
C
5
With 2 persons, carefully lift off and remove the part 2 front glass from the firebox and store aside
in a clean, secure, soft location where the panel will not fall or be disturbed. Figure E.
Remove 2 packing foams from the firebox holding in the firelog set.
E
2
INSTALLATION
1
D
Page 7 of 15
2
Advertisement
Table of Contents
