Zero-U Mounting - Powerware 5115 RM User Manual

Zero-U Mounting

Use the following procedure to install the UPS in a zero-U rack
configuration:
1. Place the UPS on a flat, stable surface with the front of the UPS
2. Attach four mounting brackets to the UPS as shown Figure 9.
3. Adjust the sides of the rack to fit the UPS and brackets (within
4. Secure the UPS to the side of the rack cabinet using one
Powerware 5115 Rack-Mount User's Guide
®
facing toward you.
Secure the short end of the mounting bracket to the UPS using
two of the supplied M3 l 6 screws.
22.54–22.78" or 56.35–56.95 cm).
M6 l 10 screw and one clip nut in each mounting bracket.
164201449 Rev A www.powerware.com
Installation
25