Alarm Operation - Sharper Image Travel Soother 20 SI621 Quick Start Manual

5
The alarm is activated by pressing the ALM ON/OFF
button on the top of the Travel Soother 20. When the alarm
is on/activated the small ALARM icon will be visible under
the clock time. By default, the secondary display will show
the alarm time setting but can be changed by pressing the
DISPLAY button.
ALARM icon indicates alarm is
active and will sound at set time.
Alarm
starts out
low and slowly
ramps up the
volume.
At the set time, the alarm sounds by ramping up in volume:
•Press ALM ON/OFF once to reset it for the next day.
•Press ALM ON/OFF twice to deactivate the alarm.
•Press SNOOZE one to three times to delay the alarm ten
to thirty minutes (each press equals a ten-minute delay).

ALARM OPERATION

When the alarm is
activated, the display
changes to show the set
time for the alarm.
Press DISPLAY if you
want to change what is
shown in this portion of
the screen.