Setting The Alarm - Sharper Image EC-B130 Instruction Manual And Warranty Information

Setting the Alarm:

For your convenience, two separate alarms may be set to accompany individual wake-up times:
ALARM 1 & ALARM 2
Alarm 1 button
Short press: Set Alarm mode
The display will show the Alarm 1 bell icon next to your selected mode.
Press and hold:
1. Time flashing for HH, press +/- button to change Hour setting, press Alarm 1 button to
confirm and change to minute setting.
2. Time flashing for MM, press +/- button to change Minute setting, wait for timeout to save and
go back to normal mode.
The display will show: Alarm 1 bell icon: HH: MM (AM/PM)
Alarm 2 button
Short press: Set Alarm mode
The display will show the Alarm 2 bell icon next to your selected mode.
Press and hold:
1. Time flashing for HH, press +/- button to change Hour setting, press Alarm 2 button to
confirm and change to minute setting.
2. Time flashing for MM, press +/- button to change Minute setting, wait for timeout to save and
go back to normal mode.
The display will show: Alarm 2 bell icon: HH: MM (AM/PM)
OFF:
Press the OFF button to turn off the "radio" feature or "audio" feature, and "Alarm OFF"
during alarm mode.
REPORT:
Press the REPORT button once and real time data and
reading will be announced.
MEMORY:
The AM/FM radio station memory records a maximum of 8 channels.
•
Normal mode radio off, short-press [MEM] button to turn on radio and automatically
return to the last memory radio station.
•
Press and hold [MEM] button more than 2 seconds to record new station. The "MEM"
icon will appear and the memory digit will flash.
•
Press the [VOL +/-] to select memory number, press "Tuner +/-" to tune the station,
press the [MEM] button to confirm current station into memory.
Beep Radio Voice
Beep Radio Voice
Off
Off
outdoor temperature