Setting And Using The Alarm - Sharper Image EC-B150 Sound Soother Instruction Manual

Setting and Using the Alarm:

For your convenience, two separate alarms may be set to accompany individual
wake up times.
• = "Alarm 1"
• = "Alarm 2"
(Refer to Fig. 2)
Alarm 1:
The Alarm 1 icon " " will appear next to the selected mode when alarm is set.
1. Press and hold the " " button and use the "+" and "-"buttons to set the hour.
Note: AM and PM will automatically change on the display as you toggle
through the hours.
2. Press the " " button to confirm and change to the minute setting.
3. Press the " " button to confirm and choose the alarm setting. Use the "+" and
"-"buttons to toggle though Weekday, Weekend, and Everyday settings.
4. Press the " " button to confirm and choose the Alarm mode. Use the "+" and
"-"buttons to choose from Tone, Sounds and Radio.
Note: To wake to one of the nature sounds use the up and down arrows on
the music button " " when you reach the sound option in the alarm mode
section. Once the desired sound is chosen press the " " button to end the
alarm setting process.
Note: When the alarm is set to wake to the radio it will play the last station it
was set at.
8
Alarm 2:
The Alarm 2 icon " " will appear next to the selected mode when alarm is set.
1. Press and hold the " " button and use the "+" and "-" buttons to set the
hour.
Note: AM and PM will automatically change on the display as you toggle
through the hours.
2. Press the " " button to confirm and change the minute setting.
3. Press the " " button to confirm and choose the alarm setting. Use the
"+" and "-"buttons to toggle though Weekday, Weekend, and Everyday
settings.
4. Press the " " Button to confirm and choose the Alarm mode. Use the "+"
and "-"buttons to choose from Tone, Sounds and Radio.
Note: To wake to one of the nature sounds use the up and down arrows
on the music button " " when you reach the sound option in the alarm
mode section. Once the desired sound is chosen press the " " button to
end the alarm setting process.
Note: When the alarm is set to wake to the radio it will play the last station
it was set at.
Snooze:
When the alarm sounds, press the SNOOZE/TIMER button to snooze. This will
automatically activate snooze time for nine minutes. Press the POWER button
to turn snooze off.
Timer:
When the power is on and you are listening to a nature sound, you may set a
timer so the unit will automatically turn off.
1. Toggle through the SNOOZE/TIMER button until you find the time of your
choice, 15, 30, 45 or 60 minutes.
2. To cancel the timer, toggle through the SNOOZE/TIMER button until the
LCD display shows "OFF" or press POWER.
(Refer to Fig.2)
9