Q) Processing & Printing; R) Caring For Your Camera; S) Troubleshooting - Polaroid 7500Zix User Manual

Q) PROCESSING & PRINTING
Fully exposed film cassette will show Exposed
After removing exposed film from camera have your film processed promptly by
photofinisher that offers Certified Advanced Photo System processing.
Negatives produced will be returned to you inside the film cassette for easy storage
and protection.
You should also receive an index print that shows each of the images in miniature size
for future identification.
To order reprints, refer to the index print to identify the images required and return the
film cassette to the photofinisher.
Reprints may be ordered in any of 3 print formats -
or (Panorama) - irrespective of the original print type selected when taking the picture.
Store the cassette in a cool dry place together with the index print for future reference.

R) CARING FOR YOUR CAMERA

• Protect the camera from dirt, rain, dampness or high heat
• Do not use solvents, alcohol or abrasive cleaners to clean the camera body
• Do not drop the camera
• Do not leave the camera in a car especially on a hot or sunny day
• Do not store the camera in extremely hot or very cold location
• Do not disassemble the camera, as it contains high voltage components
NOTE: Before undertaking an extended trip with the camera (especially if it has just been purchased), please
take a test roll of film to ensure that you are fully conversant with all key features of the camera and that
the picture results confirm correct performance. Carry spare battery with you.

S) TROUBLESHOOTING

Symptom
Film cassette does not fit
completely into film
chamber
Film does not advance
immediately after loading
(frame counter shows "0")
Camera will not operate
indication. Refer to figure 3.
Probable Cause
• Incorrectly trying to load
conventional 35mm film cassette.
• Batteries are weak or dead or
improperly inserted.
• Film status indicator of the loaded
cassette shows partially exposed ( ),
fully exposed ( ) or processed (
see fig 3 for details.
• Film cassette problems.
• Camera transport problems.
• There are no more pictures remaining
and film has not been removed.
• Batteries are weak, dead, missing,
or improperly inserted.
(Classic), (Wide view)
Corrective Action
• Use only Advanced Photo System
film cassette.
• Reload batteries correctly or replace
with fresh batteries. See paragraph D)
"LOADING BATTERIES". Then reload
film i.e. film must be inserted after
batteries are loaded to properly
sequence camera operation.
• Remove used film completely from
camera and load a fresh unexposed
) film into the camera.
• Review paragraph G) "LOADING FILM"
• Remove film completely from camera
and load another new, unexposed film.
• Return to dealer for assistance.
• Remove film completely from camera
and load a fresh film.
• Check LCD Panel for camera status.
Low battery symbol blinks warning that
no more pictures can be taken until
battery is replaced. If no symbol
appears on LCD Panel replace or
reload battery correctly.