Operation Instructions; Setting Clock Time; Timer Function - Electrolux EMSB30XCF Installation & User Manual

OPERATION INSTRUCTIONS

➢ When the oven is plugged in for the first time, a beep will sound and the display
will show "00:00" after the LED and nixie tube display on the display board are
scanned from top to bottom.
➢ In the process of setting, without any operation for about
return to standby mode.
➢ During cooking, if press STOP/CLEAR button once, the program will be paused,
and then press
STOP/ CLEAR button twice, the program will be cancelled.
➢ After cooking end, the display will show End and beep will sound every two
minutes until user press STOP/CLEAR button or open the door.
➢ In the process of operation, press a valid button, the buzzer rings once, but if press
a invalid button, the buzzer rings twice.
➢ The electronically controlling system of the microwave oven has the feature of
cooling. As for any cooking which cooking time above 2 minutes, open the oven
door or stopping state, the oven fan will work about 3 minutes automatically to cool
the oven for prolonging the life span of the oven.
S
ETTING CLOCK TIME
In standby mode, press TIMER/CLOCK button twice.
1.
Turn dial to set hour digit.
2.
Press TIMER/CLOCK button once.
3.
Turn dial to set minute digit.
4.
Press TIMER/CLOCK button to confirm.
5.
NOTE: This is a 24- hour clock. During cooking or pausing, you can check the
current clock time by pressing TIMER/CLOCK button.
T
IMER FUNCTION
The first way (Time increases):
In standby mode, during cooking or pausing, press TIMER/CLOCK button once.
1.
Press START/+30 SEC button once. When the time increases to 95 minutes,
2.
the buzzer gives an alarm for 5 seconds and automatically returns to standby
(or cooking countdown state) at the same time.
The second way (Time decreases):
In standby mode, during cooking or pausing, press TIMER/CLOCK button once.
1.
Turn dial to set desired time. The longest time is 95 minutes.
2.
START/+30 SEC
button once to resume. If you press
11
30
seconds the oven will