Sony SRS-XG300 Manual page 47

Help Guide
Wireless Speaker
SRS-XG300
Selecting the quality for music playback via BLUETOOTH connection (Codec)
The "Priority on Sound Quality" and "Priority on Stable Connection" preferences are available on the speaker for the
BLUETOOTH connection quality. The "Priority on Sound Quality" preference provides compatibility not only with SBC but
also with AAC and LDAC for music playback of high sound quality, whereas the "Priority on Stable Connection"
preference enables music playback via more stable BLUETOOTH connections. At the time of purchase, the "Priority on
Sound Quality" preference is selected.
Supported Codecs
Priority on Sound Quality (default setting): Optimal codec is automatically selected from AAC, LDAC, and SBC.
Priority on Stable Connection: SBC is selected.
Turn on the speaker.
1
The (BLUETOOTH) indicator flashes
* If the BLUETOOTH device that has previously been connected with the speaker is located nearby, the speaker may be connected
automatically with the device. In such a case, the
Change the BLUETOOTH connection quality.
2
When using the buttons of the speaker
1.
Press and hold the
seconds.
When the setting is changed to the "Priority on Stable Connection" preference, the
times in green.
When the setting is changed to the "Priority on Sound Quality" preference, the
in green.
When the speaker is connected with BLUETOOTH devices, all the connections are automatically disconnected
and then reestablished and the new setup is applied.
Hint
As long as the speaker is connected to an AC outlet by the supplied AC adaptor, you can change the BLUETOOTH
connection quality while the speaker is turned off as well.
When using "Sony | Music Center"
1.
Pair the speaker with a BLUETOOTH device, such as a smartphone.
When a BLUETOOTH connection is established, you hear voice guidance (BLUETOOTH connected) from the
speaker.
*
in blue.
(BLUETOOTH) indicator on the speaker lights up in blue.
(play)/ (call) button and the (BLUETOOTH) button simultaneously for about 2
47
(power) indicator flashes 3
(power) indicator flashes twice