Sony SRS-XG300 Manual page 23

Help Guide
Wireless Speaker
SRS-XG300
Pairing and connecting with BLUETOOTH
Pairing is the process required to mutually register the information on BLUETOOTH devices to be connected wirelessly.
To pair with a second or subsequent BLUETOOTH device, perform the following pairing procedure for each device.
The pairing information is stored on the speaker when the speaker is turned off.
Before operating the speaker, be sure to do the following:
Place the BLUETOOTH device within 1 m (3.2 ft) of the speaker.
Connect the speaker to an AC outlet with the supplied AC adaptor. Or charge the rechargeable built-in battery
sufficiently.
To avoid any sudden loud sound output from the speaker, turn down the volume of both the BLUETOOTH device and
the speaker or stop music playback.
Depending on the BLUETOOTH device, the volume of the device may be synchronized with the speaker volume
when music playback starts after a BLUETOOTH connection is established between the BLUETOOTH devices and
the speaker.
Prepare the operating instructions supplied with the BLUETOOTH device for reference.
Turn on the speaker.
1
Check the status of the (BLUETOOTH) indicator.
2
When the indicator is double flashing
In the event that the speaker is paired with a BLUETOOTH device for the first time after purchase or in the event
after the speaker is initialized (the speaker has no pairing information), the speaker automatically enters pairing
®
devices
23