Table of Contents
Advertisement
Quick Links
Operation Specification – Flic Bluetooth Panic Button
1. Overview
A. Applicable Product
i.
MODEL: CP2, CP2-LTE
B. Use: wireless panic button which can be added to CP2 device for various use cases.
C. Adding setup value in configuration file
i.
[DEVICE] BT_PANIC_DEVICE : 0: none, 1:Flic Button
ii.
Or can be set with the Config tool
1.
iii.
Updated CP2 3.3.0 config tool:
https://smartwitness.com/software/CP2_Configtool_3.3.0.zip
2. Pairing Mode Operation
A. CP2 enters pairing mode when you press and hold the panic button for 5 seconds
(pairing mode will be enabled for 20 seconds)
Flic Button: Press the Flic button for 7 seconds to complete the pairing
•
B. LED Operation
i.
RED/BLUE LED is blinking during the Pairing mode.
C. Pairing Device History Log
i.
Device information is removed after entering Paring Mode.
ii.
Device information after Pairing is stored in NAND (flic.sqlite3)
D. Event Operation
support.smartwitness.com
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for SmartWitness CP2
Summary of Contents for SmartWitness CP2
- Page 1 1. Overview A. Applicable Product MODEL: CP2, CP2-LTE B. Use: wireless panic button which can be added to CP2 device for various use cases. C. Adding setup value in configuration file [DEVICE] BT_PANIC_DEVICE : 0: none, 1:Flic Button Or can be set with the Config tool iii.
- Page 2 Press and hold the Flic button for 7seconds • If you want to pair another Flic button, then repeat Step1 to Step3 Then the first Flic button pairing information will be removed and CP2 will only have 2 Flic button pairing information only.
Need help?
Do you have a question about the CP2 and is the answer not in the manual?
Questions and answers