Advertisement
5.2.4. Ripping a workpiece more than 100mm (4”) wide.
a) Hold the workpiece firmly against the fence and the table, and turn the saw on.
b) Ensure you are NOT standing in line of the saw cut and hold the work firmly with both hands pushing it along the fence
and into the saw blade (fig 21).
c) Continue to gradually feed the workpiece through the saw blade keeping your hands away from the blade guard.
d) Pass the work completely through the saw blade and the anti-kickback fingers to the rear of the saw table.
e) Once the cut is complete handle the workpiece and off-cut according to 5.2.2.
5.2.5. workpiece less than 100mm (4”) but more than 50mm (2”) wide.
If work is less than 100mm wide, use a push stick to feed work forward (fig 22). This stick may be made from an off-cut see template 5.4.
5.2.6. workpiece 50mm (2”) wide or less.
When ripping stock 50mm (2”) or less, (such as thin paneling) and in order to prevent work catching between the rip fence and the
saw table, you may extend the fence by fixing a wooden straight edge to the length of the fence (fig 23. A). To do so, prepare two
faces the length of the fence, one 19mm wide (for most tasks) and one 23mm wide for the occasional more narrow cut. Attach the
face plate by passing two wood screws through the holes provided in the fence.
fig 22.
Declaration of Conformity We, the sole importer into the UK, declare that the product listed below is in conformity with the following
standards and directives.
TABLE SAW MODEL NO TS10/98
73/23/EEC Low Voltage Directive
89/336/EEC EMC Directive
98/37/EC Machinery Directive
93/68/EEC EC Marking Directive
NOTE:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No responsibility is accepted for incorrect use of this equipment.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your name and address, including postcode.
01284 757500
The construction file for this product is held by the Manufacturer and may
be inspected, by a national authority, upon request to Jack Sealey Ltd.
Signed by John Sealey
For Jack Sealey Ltd. Sole importer into the UK of Sealey Quality Machinery.
Sole UK Distributor
Sealey Group,
Bury St. Edmunds, Suffolk.
01284 703534
,
fig 23.
E-mail: sales@sealey.co.uk
14th July 2000
TS1098 - 0016 - (2) - 140700
Advertisement
