Advertisement
5.4.
CONSTRUCTING A PUSH STICK
When ripping work less than 100mm wide a push stick should be used to complete the feed and may easily be made from scrap
material by following the pattern below in fig 24. Ensure however the material used will not break, split or splinter during use.
fig 24.
Sole UK Distributor
Sealey Group,
Bury St. Edmunds, Suffolk.
01284 757500
01284 703534
E-mail: sales@sealey.co.uk
TS1098 - 0016 - (2) - 140700
Advertisement
