To fully charge the battery takes approx. 2 hours. Note! Never charge the unit in intrinsic safety zone and only use the included Easy-Laser charger. ECOM Tab-Ex® Display unit Based on Samsung GALAXY Tab Active, ecom´s hazardous area tablet, is certified for Info display.
XT550 Start a program User manual for XT Alignment app Tap the icon to start a program. Once you have started the app, you can tap to open the User Manual. Many of the detailed images are possible to make bigger, simply tap them! to return to the start screen at any �...
Page 4
XT550 Complete system contains Easy-Laser® XT550 Shaft system (12-1031) includes: Measuring unit XT50-M Measuring unit XT50-S Shaft brackets with chains and rods Rods 60 mm [2.36"] Rods 120 mm [4.72"] Extension chains 900 mm [35.4"] Measuring tape 3 m [9.8'] Rod tool Charger (100–240 V AC)
Page 5
XT550 Technical specifications XT50-M / XT50-S Type of detector 1 axis TruePSD 20x20 mm [0.79x0.79"] Communication Wireless technology Battery type Heavy duty Li Ion chargeable Operating time Up to 20 h continuously Resolution 0.001 mm [0.05 mils] Measuring errors <1%...
Ex-rating, voids warranty and with following standards and requirements: may result in hazardous light exposure. EMC directive: 2014/30/EU • All repairs must be done by Easy-Laser Low voltage directive: 2014/35/EU main service center. Atex directive: 2014/34/EU • Only use the included Easy-Laser charger.
fi ed to carry out limited service and repair. Always read the safety instructi ons in the main plant as a result of the use of Easy-Laser® Contact your local Service center fi rst before send- manual before using the measurement system.
Need help?
Do you have a question about the XT550 and is the answer not in the manual?
Questions and answers