Initial Settings Menu; Using The Initial Settings Menu; Video Output Settings - Pioneer S-DV434 Operating Instructions Manual

Initial Settings menu

Chapter 7
Initial Settings menu

Using the Initial Settings menu

The Initial Settings menu provides audio and
video output settings, parental lock settings,
and display settings, among others.
If an option is grayed out it means that it
cannot be changed at the current time. This is
usually because a disc is playing. Stop the
disc, then change the setting.
1 Press HOME MENU and select 'Initial
Settings'.
Initial Settings
2 Use the cursor buttons and ENTER to
select the setting and option you want to set.
All the settings and options are explained on
the following pages.

Video Output settings

Setting
TV Screen
(See also Screen sizes
and disc formats on
page 42.)
Component Out
(See also Connecting
using the component
video output on
page 31.)
Option
4:3 (Letter Box)
4:3 (Pan & Scan)
16:9 (Wide)
Interlace
Progressive
Important
• In the table below, the default setting is
shown in bold: other settings are shown in
italics.
• Some settings, such as TV Screen, Audio
Language and Subtitle Language may be
overridden by the DVD disc. Often these
settings can also be made from the DVD
disc menu.
• The Component Out setting only needs to
be set if you have connected this player to
your TV using component video.
What it means
Set if you have a conventional 4:3 TV. Widescreen movies are
shown with black bars top and bottom.
Set if you have a conventional 4:3 TV. Widescreen movies are
shown with the sides cropped so that the image fills the screen.
Set if you have a widescreen TV.
Set if your TV is not compatible with progressive scan video.
Set if your TV is compatible with progressive scan video (see
your TV's instruction manual for details). Press ENTER once
more to confirm (or RETURN to cancel).
Note that progressive scan video is only output from the
component video jacks.
07
25
En