Pioneer DV-420V-S Operating Instructions Manual page 38

Appendix
Additional information
06
Problem
Picture is not displayed.
Sound is not produced or is
distorted.
Multichannel audio signals are
not output.
Colors are not properly dis‑
played on TV screen.
38
En
Check
Is the resolution properly set?
Is the HDMI cable properly con‑
nected?
Is the HDMI cable damaged?
Is a DVI device connected?
Is HDMI Out properly set?
Is HDMI Out properly set?
Is HDMI Color properly set?
Is the input properly set on the
connected TV?
Remedy
Set HDMI Resolution properly for the con‑
nected device (page 30).
Restore HDMI Resolution to the default
setting (720x480p/ 720x576p) (page 30).
Connect the cable securely (all the way in).
With some cables, 1 080p video signals will
not be output.
If the cable is damaged, replace it with a
new cable.
The picture may not be output properly
when a DVI device is connected.
Set HDMI Out to LPCM (2CH) or Auto
(page 28).
Set HDMI Out to Auto (page 28).
Change the HDMI Color setting (page 30).
Refer to the TV's operating instructions and
switch to the proper input.