Britax GROW WITH YOU CLICKTIGHT User Manual page 18

Britax Child Safety, Inc.
• Loosen the tether and place it over the back of the child seat to
keep it from becoming pinned between the child seat and vehicle
seat during positioning.
• Adjust the child seat to the upright position and place forward
facing on the vehicle seat.
1. Release the buckle and
open the CLICKTIGHT
to access the lower
connectors.
a. Locate the two slots
in the CLICKTIGHT
cover.
b. Squeeze the
CLICKTIGHT release
levers.
2. Route the lower
connector strap along the
green belt path.
3. Firmly attach the lower
connector onto their
adjacent lower anchors.
For push-on lower
connector only: A click
helps confirm attachment.
NOTE: Verify that the
strap is not twisted.
4. Pull the end of the lower
connector strap to
remove slack.
IMPORTANT:
the webbing may prevent the
CLICKTIGHT from properly
securing.
5. Close the CLICKTIGHT.
A click helps confirm the
CLICKTIGHT is secure.
6. Firmly press the tether
hook over a designated
vehicle tether anchor.
Remove slack.
7. Secure excess webbing
with the elastic strap
16
Overtightening
Lower Connector
Hook
Or
Or
Table of Contents
Lower Connector
Push-on
(Select Models)