Britax GROW WITH YOU CLICKTIGHT User Manual page 11

Booster Mode
Position forward-facing only in a seating position with
a lap-shoulder belt.
Use only the vehicle's lap and shoulder belt system
when securing a child in booster mode. Never secure a
child with a lap belt only in booster mode.
Always secure the unoccupied child seat to the vehicle
by attaching the lower connectors to the lower anchors
in the vehicle, or by fastening the vehicle seat belt
across the unoccupied child seat.
If the lower anchors in your vehicle prevent proper
vehicle belt fit across your child you cannot use LATCH
to position this seat in booster mode. See below.
The vehicle belt fits properly when the
vehicle shoulder belt lays straight
across the center of the child's chest,
above the child's shoulder and does
not contact the child's neck (A). The
lap part of the vehicle belt should be
worn under the armrests and rest low
on the child's upper thighs (B).
• This child seat can be used in booster mode with children
who weigh between 40 and 120 lbs (18 and
54 kg) and stand between 44 and 63 in. (110 and
160 cm) in height. Britax recommends using booster
mode only once your child has outgrown harness mode.
• This child seat must be used
in upright position
in booster mode.
• In booster mode, this child
seat can be positioned on
the vehicle seat using the
LATCH system. Use the
vehicle's lap-shoulder belt to
secure the child. Ensure that
the LATCH system does not
interfere with the vehicle belt
function and
alignment when securing
your child.
GROW WITH YOU CLICKTIGHT / PLUS User Guide
WARNING!
Table of Contents
9