Advertisement
I FEEL function (Optional)
Press I FEEL button to active the function, the
will appear on the remote display.
Do it again to deactivate this function.
This function enables the remote control to measure the
temperature at its current location, and send this signal
to the air conditioner to optimize the temperature around
you and ensure the comfort.
It will automatically deactivate 2 hours later.
AU
Switch off the remote controller, then keep pressing
and
together over 3 seconds
to switch on this function.
MUTE function (Optional)
1. Press MUTE button to active this function, and
will appears on the remote display.
Do it again to deactivate this function.
2. When the MUTE function runs, the remote controller
will display the auto fan speed, and the indoor unit
will operate at lowest fan speed to be quiet feeling.
3. When press FAN/TURBO/SLEEP button, the MUTE
function will be cancel. MUTE function can not be
activated under dry mode.
Advertisement
