7 First-time setup
This is how to navigate and select with the
remote control:
•
Press
or
to select a menu option.
OK to confirm a selection.
•
Press
BACK
•
Press
to go back to the
previous screen.
•
Press
HOME to go to the Home menu.
When you connect NP2900 to the
power supply for the first time, NP2900
displays the prompt for the language
selection.
1
Select the language and confirm.
NP2900 displays the prompt for the
»
optional demo play.
You have two options:
•
View the demo.
•
Complete the first-time setup.
Tip
•
After the first-time set-up, you can change the
language in the Settings menu.
View the demo
1
Select "[Yes, show me the demo]", to
view the demo.
»
The demo plays continuously until you
exit the demo play.
2
To exit the demo play, press
Note
•
NP2900 remains in first-time setup status until
you select [No] to decline the demo play.
•
You can start the demo play again with the
DEMO button on the remote control or in the
Settings menu of NP2900.
First-time connection to
home network
After you select [No] to decline to view the
demo, NP2900 prompts you to select your
location / time zone. NP2900 also reminds
you to register NP2900 at www.philips.com/
welcome and to install the PC software.
This is how to navigate and select with the
remote control:
•
•
•
•
1
2
3
•
.
•
Press
or
to select a menu option.
OK to confirm a selection.
Press
BACK
Press
to go back to the
previous screen.
Press
HOME to go to the Home menu.
Select the location / time zone and
confirm.
NP2900 shows the prompt for the
»
network connection.
Select [Yes], to create a connection to
the network.
NP2900 shows the prompt for the
»
network setup (if no network has been
set up yet).
[No] to exit the setup and go
Select
»
to the Home menu.
Continue with one of the following
options:
First-time setup:
Wireless network
connection with automatic IP address
This setup requires the following:
•
A wireless access point or wireless
router with broadband Internet
access
•
Manual entry of your encryption key
(for encrypted network connections
only)
Wireless network
First-time setup:
connection with static IP address
This setup requires the following:
•
A wireless access point or wireless
router with broadband Internet
access
•
Manual entry of your IP address.
EN
13