Set The Volume From The External Audio Device; Display Settings; Brightness; Wallpaper - Philips Streamium HK-1008-MCi900 2010 User Manual

2
Press / repeatedly to increase/decrease
the output from left/right audio channels.
• Press CLEAR for equal output from
left/right audio channels.
Set the volume from the external
audio device
With [AUX in volume], you can set the
volume from the connected external device.
1
From Home screen, go to [Settings] >
[Sound settings].
SOUND on the remote
• Or, press
control to enter the menu of sound
settings.
2
Go to [AUX in volume]. Select the
desired volume level.

Display settings

Brightness

On MCi900, you can adjust the brightness of
the display. As desired, the display lights up,
dims or turns off when MCi900 is turned on
or switched to active standby.
• In [Settings] > [Display settings] >
[Brightness when on] or[Brightness
when standby], select an option and
press OK.

Wallpaper

For menus on MCi900, you can set the
background display (wallpaper).
To set wallpaper
1
On MCi900, select and play a photo.
2
Press SETTINGS on the remote control
to select [Settings] > [Display settings] >
[Wallpaper].
3
In [Wallpaper], select [Current picture].
Current picture is set as wallpaper.
»
EN
56

Screensaver

On MCi900, the screensaver is turned on
when MCi900 is switched to active standby.
When turned on, the selected screensaver
appears. The clock is shown on the lower right
corner of the screen.
By default, clock display appears as the
screensaver.
To set screensaver
1
On MCi900, select and play a picture.
2
Press SETTINGS on the remote control
to select [Settings] > [Display settings] >
[Screen saver].
3
In [Screen saver], select [Current
picture].
» Current picture is set as screensaver.

Slideshow settings

When in the slideshow mode, you can view
pictures one by one.
To select a play mode for slideshow
1
From the home screen, go to [Settings] >
[Slideshow settings].
Or, press SETTINGS on the remote
control to enter [Settings].
2
Select one of the following play modes.
Press OK to turn it on or off.
» [Repeat]: Play all pictures repeatedly;
» [Shuffle]: Play all pictures randomly.
To set the play time of each picture
1
From Home screen, go to [Settings] >
[Slideshow settings] > [Time per slide].
SETTINGS on the remote
• Or, press
control to enter [Settings].
2
In [Time per slide], select the desired
time duration.