Turn On/Off; Connect Power Supply - Philips Streamium HK-1008-MCi900 2010 User Manual

Turn on/off

Connect power supply

Warning
•
Risk of product damage! Ensure that the
power supply voltage corresponds to the
voltage printed on the back or the underside
of the product.
• Connect MCi900 to the power supply.
Note
•
The type plate information is located at the
back or at the underside of the product.
Turn on/off
1
Press or a source selector to turn on
the unit.
2
To turn off the unit,
• Press to switch to active standby;
• Or, press and hold
Eco standby (energy-saving mode).
to switch to
Active standby
When in active standby, some major functions
of MCi900 remain in the normal state of
power consumption, e.g. Wi-Fi connection,
clock display. Thus, MCi900 can quickly go to
the running state when you switch MCi900
from active standby to on.
In active standby,
• The power indicator lights up red;
• Clock time is displayed if you have set
clock.
And, the unit is still connected to the Wi-Fi/
wired network.
Auto active standby
If no activity happens on MCi900 for 10
minutes, MCi900 can switch to active standby
automatically.
Eco standby
Eco standby is an energy-saving mode. In Eco
standby, all major functions are switched to a
low-power state or off, e.g. micro-processor,
Wi-Fi connection, display, and hard disk.
EN
27