Table of Contents
Advertisement
TrilliumSeries™ adiabatic cooler should be rigged and
assembled as outlined in this bulletin.
These procedures should be thoroughly reviewed prior to the actual
rigging and assembly of the equipment to acquaint all personnel
with procedures to be followed and to assure that all necessary
equipment will be available beforehand. Only personnel qualified to
do so should undertake the installation, operation, maintenance,
and repair of this equipment. Proper care, procedures, and tools
must be used in handling, lifting, installing, operating, maintaining,
and repairing this equipment to prevent personal injury and/or
property damage.
TrilliumSeries™ Adiabatic Cooler - TRF Rigging & Assembly Instructions – Forward
Be sure to have a copy of the submittal package
available for reference. If you do not have a copy of this
drawing, or if you need additional information about
this unit, contact your local
whose name and telephone number are on a label
adjacent to the access door. The model number and
serial number of the unit are also located in this area.
BAC Representative
Page | 2
Advertisement
Table of Contents
