Table of Contents
Advertisement
What to do in an emergency
Notes on the safe use of the tyre
Mobility Kit
Park your car at the side of the
road so that you can work with
the TMK away from moving traf -
fic. Place your warning triangle in
a prominent place to make pass -
ing vehicles aware of your loca -
tion.
To be sure your vehicle will not
move, even when you're on fairly
level ground, always set your
parking brake.
Only use the TMK for sealing/
inflation passenger car tyres. Do
not use on motorcycles, bicycles
or any other type of tyres.
Do not remove any foreign
objectssuch as nails or screws -
that have penetrated the tyre.
Before using the TMK, read the
precautionary advice printed on
the sealant bottle!
Provided the car is outdoors,
leave the engine running. Other -
wise operating the compressor
may eventually drain the car bat -
tery.
Never leave the TMK unattended
whilst it is being used.
Do not leave the compressor run -
ning for more than 10 min. at a
time or it may overheat.
Do not use the TMK if the ambi -
ent temperature is below -30 C (-
22 F).
7
32
If you have a flat tyre (with Tyre Mobility Kit)
When the tyre and wheel are
damaged, do not use Tyre Mobil -
ity Kit for your safety.
Technical Data
System voltage: DC 12 V
Working voltage: DC 10 - 15 V
Amperage rating: 10 A 1A (at DC
12V operation)
Suitable for use at temperatures: -
30 ~ +70 C (-22 ~ +158 F)
Max. working pressure: 6 bar (87
psi)
Size
Compressor: 161 x 150 x 55.8 mm
(6.3 x 5.9 x 2.2 in.)
Sealant bottle: 81 x 85
3.3
in.)
Compressor weight: 650 g (1.43 lbs)
Sealant volume: 200 ml (12.2 cu. in.)
* Sealant and spare parts can be
obtained and replaced at an
authorised vehicle or tyre dealer.
Empty sealant bottles may be dis -
posed of at home. Liquid residue
from the sealant should be dis -
posed of by your vehicle or tyre
dealer or in accordance with local
waste disposal regulations.
mm (3.2 x
Advertisement
Chapters
Table of Contents
