Distributing The Sealant - Kia Rio 2022 Owner's Manual

What to do in an emergency
may flow backward, possibly clog -
ging the filling hose.
9. Connect between compressor and
the vehicle power outlet using the
cable and connectors.
OYB060012R
NOTICE
Only use the front passenger side
power outlet.
10.With the ignition switched on or
ENGINE START/STOP button posi -
tion on: Switch on the compressor
and let it run for approximately 3
minutes to fill the sealant. The
inflation pressure of the tyre
after filling is unimportant.
11.Switch off the compressor.
12.Detach the hose from the seal -
ant bottle connector and from the
tyre valve.
Return the Tyre Mobility Kit to its
storage location in the vehicle.
7 30
If you have a flat tyre (with Tyre Mobility Kit)
WARNING
Carbon monoxide poisoning and suf -
focation is possible if the engine is
left running in a poorly ventilated or
unventilated location (such as inside
a building).

Distributing the sealant

13.Immediately drive approxi -
mately 7~10 km (4~6 miles or,
about 10 min) to evenly distribute
the sealant in the tyre.
ODEEV088017NR
CAUTION
Do not exceed a speed of 60 km/h
(35 mph). If possible, do not fall
below a speed of 20 km/h (12 mph).
whilst driving, if you experience any
unusual vibration, ride disturbance
or noise, reduce your speed and
drive with caution until you can
safely pull off of the side of the
road. Call for road side service or
towing.